|STM: Foreal Estimate from STM’s Picture Simulation||CWL (nm) & Also Peak: Approximate||942||939||935||927|
|QD: Real Data||CWL (nm): Peak is different||930||925||915||895|
|STM: Foreal Estimate from STM’s Picture Simulation||FWHM (nm): Approximate||32||32||32||32|
|QD: Real Data||FWHM (nm)||27||25||25||25|
STM: Estimate from Original Email Picture Simulation (Below)
Foreal Real Data Plot (Above)
It is clear you sent us a simulation. Foreal can shift the CWL a little longer, say 10-15nm. Please comment on the following:
- What do the real data plots look like from your current coating vendor?
- Do you really need the exact CWLs at the 4 angles?
- What is the CWL tolerance (in nm) for the 4 CWLs?
- What is the FWHM tolerance (in nm) for the 4 CWLs?